• Microprocessor controlled with advanced digitalized adaptive signal processor algorithm
• Installation angle is manually adjustable via a supplied rotating bracket (optional installation)
• Pet Immune Sensitivity can be controlled via a DIP switch. Immunity levels of both background environmental factor and pet are then adjusted accordingly.
• Four levels of Pet Immune Sensitivity are available: Low (75 cm / 60 kg), Medium (60 cm / 40 kg), High (45 cm / 30 kg), and Superior (30 cm / 20 kg)
• Adjustable environment settings: choices of facing a wall or open space, facing a lawn or concrete/stone ground
• Auto Temperature & Lux Profile Adjustments – complex intelligent D.A.S.P. algorithm to distinguish background environmental changes such as temperature and lighting and therefore avoiding false alarms
• Water resistance with IP rating 66
• Double protection of unauthorized sensor removal and opening/sabotage by both built-in Tilt  & Tamper Switches
• Protection from: direct sunlight, wind, snow and rain, and small animals
• Randomized supervision signals for trouble-free system integrity checking
  Low battery detection
• Superior radio interference rejection of up to 20V/m at frequencies of 100 kHz to 2.7 GHz
• Automatic power saving mechanism; Compact design
• LED: fault & test mode indicator, and also doubles as Walk Test activation button
• Superior white light noise rejection; Complied with CE & UL requirements

• Battery-operated; Extensive RF range (F1 model only)
• Superb Reliability; Siren output level is 102dB at 1 meter
• Long battery life; Fast signal transmission;
• Attractive design and high-powered strobe light (choice of red or blue lens)
• Unique alarm sounds for fire and burglary
• Squawk notifications of arming, disarming, and low battery status
• Programmable siren duration of 3/5/10 minutes
• Dip switch allows manual control of strobe light and alarm duration
• Transmits low battery and supervisory signals
• Antenna design for optimal wireless performance
• Tamper protection prevents unauthorized removal and vandalism
• IP44 waterproof and UV resistant housing; Compliant with CE requirements

• Sleek, modern design with long battery life; Mounted on door or window frames
• Extension terminals for connection to wired devices; Doubles as an universal transmitter
• Enables home automation and security systems to turn on/off appliances accordingly
• Optional IPX4 waterproof case for outdoor usage (DC-23R3-F1 only)
• Optional IPX4 waterproof case comes in multiple colors for camouflage purpose (DC-23R3-F1 only)
• Powerful magnet allows for an overall side-to-side gap distance of 28mm
• Randomized supervision signals to check system integrity and troubleshooting
• Tamper protection to prevent unauthorized removal
• LED serves as a fault and test mode indicator; Low battery detection
• Compliant with CE requirement; Certified to Standard: EN 50131 Grade2, Class II

Hikvision DS-PDMCK-EG2-WB Wireless Magnet Shock Detector

Hikvision DS-PDMCK-EG2-WB Wireless Magnet Shock Detector

• It is a wireless opening detector that notifies of first signs of room intrusion through a door or window. Combined shock sensor can analysis shocks while ignoring background vibrations
  • Magnetic contact combined with shock and tilt detection
  • 2 wired inputs extension
  • Fully remote configurable through App
  • Multiple enrollment methods and easy installation design
  • Frequency hopping against jamming for reliable transmission

• Instant wireless control of the security system
• Four buttons: Arm / Disarm / Home / Panic Alert
• Durable, scratch-resistant buttons; Easy & Intuitive to use
• LED serves as a transmission status indicator
• Low battery detection; Long battery life
• Convenient and portable keychain design
• Suitable for security and home automation premises

• Early detection of break-in attempts of glass windows, doors, roof, or safety boxes
• Detects major shock attack or accumulated minor shock attacks
• Adjustable sensitivity threshold levels: Low, Medium, High
• Setting configuration locally on device (SVGS-3 only)
• Setting configuration remotely on device via Control Panel (SVGS-5 only)
• Wireless and lightweight for easy installation; LED indicator
• Works on glass, plywood and safety box; Low battery indicator
• Regular supervision signals to check system integrity
• Suitable for residential and commercial security usage
• F1 technology accelerate the speed of signal transmission, reliability, and boots communication range. (F1 models only)

• Emergency Panic Alarm Button; Long battery life
• IP44 water resistant rating; EN50131 certified
• Extensive RF communication range (PB-15-F1); LED indicator
• Fast signal transmission (PB-15-F1); Low Battery detection
• Wireless and Lightweight for easy installation
• Periodic supervisory signals check system integrity

• PIR motion detector camera for outdoor surveillance
• F1 technology leverages long communication range, enhanced penetration and sensitivity rate
• Two levels of pet immunity: Low (75cm/60kg [132 lbs]) / High (50cm/35kg [77 lbs])
• 27 kilos (59 lbs) pet immunity eliminates false alarms caused by pets
• IP45 waterproof protection for outdoor usage
• CMOS camera with night vision capability

Hikvision DS-PDPG12P-EG2-WB Wireless PIR-Glass Break Detector

Hikvision DS-PDPG12P-EG2-WB Wireless PIR-Glass Break Detector

• • PIR Detection Range: 12m / 85.9°
  • Glass Break Range: 8m / 120°
  • Up to 30KG pet immunity
  • Fully remote configurable through App
  • Multiple enrollment method and easy installation design
  • Easy replaceable battery with PCB protected

Hikvision DS-PM1-I1-WE Single Input Transmitter

Hikvision DS-PM1-I1-WE Single Input Transmitter

• DS-PM1-I1-WE wireless single input transmitter offers a connection of third party wired detectors like outdoor PIR, to AX PRO alarm system. The alarm types and zone parameters can be set through APP by installers easily, small size design is convenient for installation. Also, transmitter has a feature of detecting device removal by accelerometer application, if someone moves the detector away, an alarm will be reported immediately.
• • Small size design, which can be put into wired detector easily
  • 868MHz two-way wireless communication
  • LED display, show the real status of device
  • With one tamper input and one PGM, can be used as zone input or alarm output
  • With 3.3v voltage output, can be used to power up external wired detector
  • Detection of device removal by accelerometer

• Keypad and LCD Display Illuminated for easy Night-Time Visibility
• Power Saving Feature that consumes power only when necessary
• Tamper Protection against unauthorized removal
• Dual Key Function to trigger panic, fire or medical alarms
• Easy & flexible installation with the option of Wall-mount or Table Mount
• Regular Supervision Signals to check System Integrity
• Extensive RF Communication Range, Faster Signal Transmission
• Alarm Memory, Event Logs, Fault Reports or system status shown on the 32-Character LCD Display
• Sleek, Modern Design; Low Battery Detection
• Audible Beeps to indicate Entry/Exit Delays and other system status
• Integrates up to 60 Tag Readers or NFC Labels (Optional)
• Enables user to Arm/Disarm the security system by simply swiping a Proximity Tag Reader or NFC Label (Optional)

• Detects suspicious movements by-pass infrared technology
• Microprocessor controlled with advanced Adaptive Digital Signal Processing (ADSP) algorithms for false alarm immunity
• Pet immunity up to 27 kilos (59lbs); Two selectable sensitivity levels
• Wireless for easy wall or corner mount; High immunity to false alarms
• Randomized supervision signals for system integrity; Low battery detection
• Detection range: 12 meters over a 110° angle; Superior white light and noise rejection
• Fast signal transmission & Extensive RF range (F1 models); Automatic power saving mechanism
• Superior radio interference rejection; Automatic power saving mechanism
• Tamper protection against sabotage; LEDs display operational status
• Temperature compensated sensitivity control; UL639 compliant & EN50131 Grade 2, Class II