IPC-T240H-M HiLook 4MP CMOS Network Turret Camera
IPC-T240H-M HiLook 4MP CMOS Network Turret Camera
Camera
-
- Image Sensor – 1/3″ progressive scan CMOS
- Min. Illumination – Color: 0.01 Lux @(F1.2, AGC ON), 0.028Lux @ (F2.0, AGC ON)
- Shutter Speed – 1/3 s to 1/100, 000 s
- Slow Shutter – Yes
- Auto-Iris – No
- Day &Night – IR cut filter
- Digital Noise Reduction – 3D DNR
- WDR – 120 dB
- Angle Adjustment – Pan: 0° to 360°, tilt: 0° to 75°, rotation: 0° to 360
Lens
-
- Focal Length – 2.8 mm, 4 mm, 6 mm
- Aperture – F2.0
- Focus – No
- FOV – 2.8 mm, horizontal FOV 100°, vertical FOV 55°, diagonal FOV 117°|4 mm, horizontal FOV 77°, vertical FOV 42°, diagonal FOV 88°|6 mm, horizontal FOV 51°, vertical FOV 28°, diagonal FOV 58°
- Lens Mount -M12
IR
-
- IR Range – Up to 30 m
- Wavelength -850 nm
Compression Standard
-
- Video Compression – Main stream: H.265/H.264, Sub stream: H.265/H.264/MJPEG
- H.264 Type – Baseline Profile/Main Profile/High Profile
- H.264+ – Main stream supports
- H.265 Type – Main Profile
- H.265+ – Main stream supports
- Video Bit Rate – 32 Kbps to 8 Mbps
IPC-T240H-M HiLook 4MP CMOS Network Turret Camera Smart Feature-set
-
- Region of Interest – 1 fixed region for main stream and sub-stream
Image
-
- Max. Resolution – 2560 × 1440
- Main Stream – 50Hz: 20fps (2560 × 1440), 25fps (2304 × 1296, 1920 × 1080, 1280 × 720)
Max. Frame Rate – 60Hz: 20fps (2560 × 1440), 30fps (2304 × 1296, 1920 × 1080, 1280 × 720) - Sub-stream – 50Hz: 25fps (640 × 480, 640 × 360, 320 × 240)
Max. Frame Rate – 60Hz: 30fps (640 × 480, 640 × 360, 320 × 240) - Image Enhancement – BLC, 3D DNR
- Image Settings – Saturation, brightness, contrast, sharpness, AGC, white balance adjustable by client software or web browser
- Day/Night Switch – Auto, scheduled
IPC-T240H-M HiLook 4MP CMOS Network Turret Camera Network
-
- Network Storage – NAS (NFS, SMB/CIFS)
- Alarm Trigger – Motion detection, video tampering alarm, illegal login
- Protocols – TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP,
SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour - General Function – Anti-flicker, heartbeat, mirror, password protection, privacy mask, watermark, IP address filter
- Firmware Version – 5.5.3
- API – ONVIF (PROFILE S, PROFILE G), ISAPI
- Simultaneous Live View – Up to 6 channels
- User/Host – Up to 32 users 3 levels: Administrator, Operator and User
- Client – HiLookVision PC Client, HiLookVision App
- Web Browser – IE8+, Chrome 41.0-44, Firefox 30.0-51, Safari 8.0-11
IPC-T240H-M HiLook 4MP CMOS Network Turret Camera Interface
-
- Communication Interface – 1 RJ45 10M/100M self-adaptive Ethernet port
General
-
- Operating Conditions – -30 °C to 50 °C (-22 °F to 122 °F), humidity: 95% or less (non-condensing)
- Power Supply – 12 VDC ± 25%, 5.5 mm coaxial power plug PoE (802.3af, class 3)
- Power Consumption and Current – 12 VDC, 0.4 A, max: 5 W, PoE: (802.3af, 36 V to 57 V), 0.2 A to 0.1 A, Max: 6.5 W
- Ingress Protection – IP67 TVS 2000V lightning protection, surge protection and voltage transient protection
- Material – Metal & Plastic
- Dimensions – Camera: Ø 110 mm × 93.2 mm (Ø 4.3″ × 3.7″)
With package: 150 mm × 150 mm × 141 mm (5.9″ × 5.9″ × 5.6″) - Weight -Camera: approx. 350 g (0.8 lb.) With package: approx. 610 g (1.3 lb.)
Available Models
-
- IPC-T240H-M (2.8 mm) White, Black
- IPC-T240H-M (4 mm) White, Black
- IPC-T240H-M (6 mm) White, Black
IPC-T240H-M HiLook 4MP White CMOS Network Turret Camera Updated Model:
IPC-T240H-M HiLook 4MP Black CMOS Network Turret Camera Updated Model:
IPC-T240H-M HiLook 4MP CMOS Network Turret Camera Dimension
IPC-T240H-M HiLook 4MP CMOS Network Turret Camera Isometric View (White)
IPC-T240H-M HiLook 4MP CMOS Network Turret Camera Isometric View (Black)
IPC-T240H-M HiLook 4MP CMOS Network Turret Camera
Unboxing Hilook (Hikvision) Turret – IPC-T240H 4MP
Setting the Network Camera over the LAN
-
- Purpose:
To view and configure the camera via a LAN, you need to connect the network camera in the same subnet with your computer, and install the SADP or HiLookVision software to search and change the IP of the network camera.
Note: For the detailed introduction of SADP - Wiring over the LAN
The two ways of cable connection of a network camera and a computer: - Purpose:
To test the network camera, you can directly connect the network camera to the
computer with a network cable
- Purpose:
Activating the Camera
-
- You are required to activate the camera first by setting a strong password for it before
you can use the camera. - Activation via Web Browser, Activation via SADP, and Activation via Client Software
are all supported.
Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to enter the activation interface.
Notes: The default IP address of the camera is 192.168.1.64. For the camera enables the DHCP by default, the IP address is allocated automatically. And you need to activate the camera via SADP software.
- You are required to activate the camera first by setting a strong password for it before
Setting the Network Camera over the WAN
-
- Purpose:
This section explains how to connect the network camera to the WAN with a static IP
or a dynamic IP.
Static IP Connection
Before you start:
Please apply a static IP from an ISP (Internet Service Provider). With the static IP
address, you can connect the network camera via a router or connect it to the WAN
directly.
Connecting the network camera via a router
Steps:
1. Connect the network camera to the router.
2. Assign a LAN IP address, the subnet mask and the gateway.
3. Save the static IP in the router.
4. Set port mapping, e.g., 80, 8000, and 554 ports. The steps for port mapping vary according to the different routers. Please call the router manufacturer for assistance with port mapping.
5. Visit the network camera through a web browser or the client software over the internet.
6.Connecting the network camera with static IP directly
You can also save the static IP in the camera and directly connect it to the internet without using a router.
- Purpose:
Dynamic IP Connection
-
- Before you start:
Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect
the network camera to a modem or a router.
Connecting the network camera via a router
Steps:
1. Connect the network camera to the router.
2. In the camera, assign a LAN IP address, the subnet mask and the gateway.
3. In the router, set the PPPoE user name, password and confirm the password.
4. Set port mapping. E.g. 80, 8000, and 554 ports. The steps for port mapping vary
depending on different routers. Please call the router manufacturer for assistance
with port mapping.
5. Apply a domain name from a domain name provider.
6. Configure the DDNS settings in the setting interface of the router.
7. Visit the camera via the applied domain name. - Connecting the network camera via a modem
- Purpose:
This camera supports the PPPoE auto dial-up function. The camera gets a public IP
address by ADSL dial-up after the camera is connected to a modem. You need to
configure the PPPoE parameters of the network camera. - Note: The obtained IP address is dynamically assigned via PPPoE, so the IP address
always changes after rebooting the camera. To solve the inconvenience of the
dynamic IP, you need to get a domain name from the DDNS provider (E.g.
DynDns.com). Please follow the steps below for normal domain name resolution and
private domain name resolution to solve the problem. - Normal Domain Name Resolution
Steps:
1. Apply a domain name from a domain name provider.
2. Configure the DDNS settings in the DDNS Settings interface of the network
camera.
3. Visit the camera via the applied domain name. - Private Domain Name Resolution
Steps:
1. Install and run the IP Server software in a computer with a static IP.
2. Access the network camera through the LAN with a web browser or the client
software.
3. Enable DDNS and select IP Server as the protocol type.
- Purpose:
- Before you start:
IPC-T240H-M HiLook 4MP CMOS Network Turret Camera
IPC-T240H-M HiLook 4MP CMOS Network Turret Camera,1/3" PS CMOS,2560 × 1440@20fps, 2.8 mm/4 mm/6 mm fixed lens, Dual stream ,120 dB WDR, 3D DNR,30m IR range,PoE,IP67
Product SKU: IPC-T240H-M
Product Brand: HiLook
Product Currency: AUD
Product Price: 144
Price Valid Until: 2021-04-30
Product In-Stock: InStock
5
Table of Contents
Poovarasan G V – :
Super Advanced Cost-effective IP Camera