IPC-T641H-Z HiLook 4MP Motorized VF New Advanced IP Cam

$220


IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera

IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera

    • 1/3″ progressive scan CMOS
    • 2560 × 1440@20fps
    • 2.8 mm to 12 mm varifocal lens
    • H.265+, H.265, H.264+, H.264
    • Dual stream
    • 3D DNR
    • Up to 30 m IR range
    • IP67

Share it:
Compare

IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera

IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera

Camera

    • Image Sensor – 1/3″ progressive scan CMOS
    • Min. Illumination – Color: 0.01 Lux @ (F1.2, AGC ON), 0.02 Lux @ (F1.6, AGC ON)
    • Shutter Speed – 1/3 s to 1/100,000 s
    • Slow Shutter – Yes
    • Auto-Iris – No
    • Day &Night – IR cut filter with auto switch
    • 3-Axis Adjustment – Pan: 0° to 360°, tilt: 0° to 75°, rotation: 0° to 360°
    • DNR (Digital Noise Reduction) – 3D DNR
    • WDR (Wide Dynamic Range) – 120 dB

IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera Lens

    • Focal Length – 2.8 to 12 mm
    • Aperture – F1.6
    • Focus – Auto
    • FOV – Horizontal FOV 92.8° to 29°, vertical FOV 50.2° to 16.4°, diagonal FOV 109° to 32.3°
    • Lens Mount – Φ14

IR

    • IR Range – Up to 30 m
    • Wavelength – 850nm

IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera Compression Standard

    • Video Compression – Main stream: H.265/H.264, Sub stream: H.265/H.264/MJPEG
    • H.264 Type – Baseline profile/Main profile/High profile
    • H.264+ – Main stream supports
    • H.265 Type – Main profile
    • H.265+ – Main stream supports
    • Video Bit Rate – 32 Kbps to 8 Mbps

IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera Smart Feature-set

    • Region of Interest – Support 1 fixed region for main stream

Image

    • Max. Resolution – 2560 × 1440
    • Main Stream – 50Hz: 20fps (2560 × 1440), 25fps (2304 × 1296, 1920 × 1280, 1280 × 720)
      Max. Frame Rate – 60Hz: 20fps (2560 × 1440), 30fps (2304 × 1296, 1920 × 1280, 1280 × 720)
    • Sub-stream – 50Hz: 25fps (640 × 480, 640 × 360, 320 × 240)
      Max. Frame Rate – 60Hz: 30fps (640 × 480, 640 × 360, 320 × 240)
    • Image Enhancement – BLC/3D DNR
    • Image Settings – Brightness, saturation, contrast, sharpness are adjustable via web browser or client software
    • Day/Night Switch – Support auto, scheduled, day, night

IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera Network

    • Alarm Trigger – Motion detection, video tampering, network disconnected, IP address conflict, illegal login, HDD error, HDD full
    • Network Storage – Support built-in microSD/SDHC/SDXC card (128G), local storage and NAS (NFS,SMB/CIFS), ANR
    • Protocols – TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, SMTP, IGMP, 802.1X, QoS, IPv6, Bonjour
    • General Function – One-key reset, heartbeat, mirror, password protection, privacy mask, watermark, IP address filter
    • Firmware Version – V5.5.52
    • API – ONVIF(PROFILE S, PROFILE G), ISAPI
    • Simultaneous Live View – Up to 6 channels
    • User/Host – Up to 32 users 3 levels: Administrator, Operator and User
    • Client – HiLookVision PC Client, HiLookVision App
    • Web Browser – IE8+, Chrome 41.0-44, Firefox 30.0-51, Safari 8.0-11

IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera Interface

    • Communication Interface – 1 RJ45 10M/100M self-adaptive Ethernet port
    • On-board Storage – Built-in microSD/SDHC/SDXC slot, up to 128 GB
    • Reset Button – Yes

General

    • Operating Conditions – -30 °C to 60°C (-22 °F to 140°F), humidity: 95% or less (non-condensing)
    • Power Supply – 12 VDC ± 25%, PoE (802.3af), class 3
    • Power Consumption – 12 VDC, 1 A, Max. 11 W
      PoE (802.3af, 36 V to 57 V), 0.4 A to 0.2 A, Max. 12.5 W
    • Ingress Protection – IP 67
    • Material – Camera body: metal, bottom base: plastic
    • Dimensions – Camera: Ø 129.4 mm × 116.4 mm (5.1″ × 4.6″)
      With package: 170 mm × 170 mm × 150 mm (6.7″ × 6.7″ × 5.9″)
    • Weight – Camera: 560 g (1.2 lb.)
      With package: 850g (1.9 lb.)

Available Model

    • IPC-T641H-Z(2.8 to 12 mm)

Accessories

    • HIA-B402-130T – Wall Mount
    • HIA-B101-130T – Pendant Mount
    • HIA-B301 – Vertical Pole Mount
    • HIA-J103 – Junction Box
    • HIA-J202 – Inclined Ceiling Mount

IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera Dimension

IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera Isometric View

IPC-T641H-Z HiLook 4MP IR Motorized VF IP Turret Camera

How to Install IP Turret Camera

Setting the Network Camera over the LAN

    • Purpose:
      To view and configure the camera via a LAN, you need to connect the network camera in the same subnet with your computer, and install the SADP or HiLookVision software to search and change the IP of the network camera.
      Note: For the detailed introduction of SADP
    •  Wiring over the LAN
      The two ways of cable connection of a network camera and a computer:
    • Purpose:
      To test the network camera, you can directly connect the network camera to the
      computer with a network cable

Activating the Camera

    • You are required to activate the camera first by setting a strong password for it before
      you can use the camera.
    • Activation via Web Browser, Activation via SADP, and Activation via Client Software
      are all supported.
      Activation via Web Browser
      Steps:
      1. Power on the camera, and connect the camera to the network.
      2. Input the IP address into the address bar of the web browser, and click Enter to enter the activation interface.
      Notes: The default IP address of the camera is 192.168.1.64. For the camera enables the DHCP by default, the IP address is allocated automatically. And you need to activate the camera via SADP software.

Setting the Network Camera over the WAN

    • Purpose:
      This section explains how to connect the network camera to the WAN with a static IP
      or a dynamic IP.
      Static IP Connection
      Before you start:
      Please apply a static IP from an ISP (Internet Service Provider). With the static IP
      address, you can connect the network camera via a router or connect it to the WAN
      directly.
      Connecting the network camera via a router
      Steps:
      1. Connect the network camera to the router.
      2. Assign a LAN IP address, the subnet mask and the gateway.
      3. Save the static IP in the router.
      4. Set port mapping, e.g., 80, 8000, and 554 ports. The steps for port mapping vary according to the different routers. Please call the router manufacturer for assistance with port mapping.
      5. Visit the network camera through a web browser or the client software over the internet.
      6.Connecting the network camera with static IP directly
      You can also save the static IP in the camera and directly connect it to the internet without using a router.

Dynamic IP Connection

    • Before you start:
      Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect
      the network camera to a modem or a router.
      Connecting the network camera via a router
      Steps:
      1. Connect the network camera to the router.
      2. In the camera, assign a LAN IP address, the subnet mask and the gateway.
      3. In the router, set the PPPoE user name, password and confirm the password.
      4. Set port mapping. E.g. 80, 8000, and 554 ports. The steps for port mapping vary
      depending on different routers. Please call the router manufacturer for assistance
      with port mapping.
      5. Apply a domain name from a domain name provider.
      6. Configure the DDNS settings in the setting interface of the router.
      7. Visit the camera via the applied domain name.
    • Connecting the network camera via a modem
      • Purpose:
        This camera supports the PPPoE auto dial-up function. The camera gets a public IP
        address by ADSL dial-up after the camera is connected to a modem. You need to
        configure the PPPoE parameters of the network camera.
      • Note: The obtained IP address is dynamically assigned via PPPoE, so the IP address
        always changes after rebooting the camera. To solve the inconvenience of the
        dynamic IP, you need to get a domain name from the DDNS provider (E.g.
        DynDns.com). Please follow the steps below for normal domain name resolution and
        private domain name resolution to solve the problem.
      • Normal Domain Name Resolution
        Steps:
        1. Apply a domain name from a domain name provider.
        2. Configure the DDNS settings in the DDNS Settings interface of the network
        camera.
        3. Visit the camera via the applied domain name.
      • Private Domain Name Resolution
        Steps:
        1. Install and run the IP Server software in a computer with a static IP.
        2. Access the network camera through the LAN with a web browser or the client
        software.
        3. Enable DDNS and select IP Server as the protocol type.

 

IPC-T641H-Z HiLook 4 MP IR Motorized VF IP Turret Camera

IPC-T641H-Z HiLook 4 MP IR Motorized VF IP Turret Camera,1/3" progressive scan CMOS 2.8 mm to 12 mm varifocal lens, 30 m IR range, IP67

Product SKU: IPC-T641H-Z

Product Brand: HiLook

Product Currency: AUD

Product Price: 220

Price Valid Until: 2021-04-30

Product In-Stock: InStock

Editor's Rating:
5
Weight 0.850 kg
Dimensions 170 × 170 × 150 mm
Brand

HiLook

Special Features

Motorized Lens

IPC-T641H-Z HiLook Data Sheet

Download HiLook IPC-T641H-Z_Datasheet

IPC-T641H-Z HiLook 4 MP IR Motorized VF IP Turret Camera

IPC-T641H-Z HiLook 4 MP IR Motorized VF IP Turret Camera,1/3" progressive scan CMOS 2.8 mm to 12 mm varifocal lens, 30 m IR range, IP67

Product SKU: IPC-T641H-Z

Product Brand: HiLook

Product Currency: AUD

Product Price: 220

Price Valid Until: 2021-04-30

Product In-Stock: InStock

Editor's Rating:
5

Reviews

There are no reviews yet.

Be the first to review “IPC-T641H-Z HiLook 4MP Motorized VF New Advanced IP Cam”