NVR301-04S2-P4 UNV New Advanced 4 Port PoE NVR
NVR301-04S2-P4 UNV New Advanced 4 Port PoE NVR
Video/Audio Input
-
- IP Video Input – 4Ch
Network
-
- Incoming Bandwidth – 40Mbps
- Outgoing Bandwidth – 40Mbps
- Remote Users – 128
- Protocols – P2P,UPnP,NTP,DHCP,PPPoE
Video/Audio Output
-
- HDMI:1920x1080p/60Hz, 1920x1080p/50Hz, 1600×1200/60Hz, 1280×1024/60Hz, 1280×720/60Hz, 1024×768/60Hz
- VGA:1920x1080p/60Hz, 1920x1080p/50Hz, 1600×1200/60Hz, 1280×1024/60Hz, 1280×720/60Hz, 1024×768/60Hz
- Recording Resolution – 6MP/5MP/4MP/3MP/1080p/960p/720p/D1/2CIF/CIF
- Synchronous Playback – 4Ch
- Corridor Mode Screen – 3/4
Decoding
-
- Decoding format – Ultra 265/H.265/H.264
- Live view/Playback – 6MP/5MP/4MP/3MP/1080p/960p/720p/D1/2CIF/CIF
- Capability – 1 x 6MP@20, 1 x 5MP@30, 2 x 4MP@25, 2 x 3MP@30,4 x 1080p@25, 8 x 960p@25,8 x 720p@30
Hard Disk
-
- SATA – 1 SATA interface
- Capacity – up to 10TB for each disk
External Interface
-
- Network Interface – 1RJ45 10M/100M Self – adaptive Ethernet InterfaceÂ
- USB Interface – Rear panel;2xUSB2.0
- Supported Standard – IEEE 802.3at, IEEE 802.3af
PoE
-
- Interface – 4 independent 100 Mbps PoE network interfaces
- Max Power – Max 30W for single port, Max 54W in total
- Supported Standard – IEE 802.3at,IEEE 802.3af
General
-
- Power Supply – 48V DC, Power Consumption: ≤10W (Without HDD)
- Working Environment – -10°C ~ + 55°C (+14°F ~ +131°F), Humidity ≤ 90% RH (non-condensing)Â
- Dimension (WXDXH) – 260mm × 240mm × 46mm (10.2″×9.4″×1.8″)
- Weight (Without HDD) – 1.1kg (2.43 lb)
NVR301-04S2-P4 UNV New Advanced 4 Port PoE NVR Isometric View
NVR301-04S2-P4 UNV New Advanced 4 Port PoE NVR Side View
NVR301-04S2-P4 UNV New Advanced 4 Port PoE NVR Dimensions
Additional Information
Default IP, Username and Password
-
- Default IP address: 192.168.1.30
- Default admin username: admin
- Default admin password: 123456 (intended only for first-time login and should be changed to a strong one with at least 8 characters including upper and lower case letters, digits and symbols for security)
Startup
-
- Verify installation and cable connection are correct. Connect to power and then turn on the power on/off switch (if applicable). Follow the wizard to complete the basic setup after the NVR starts up.
Live View
-
- Click Menu > Camera > Camera. The discovered cameras are listed. Click to add a camera. To search a network segment, click Search. If a camera is added but live video is not available, check network connection and make sure the correct camera username and password are set in the system. Modify if necessary.
Playback
-
- Right-click a preview window and then choose Playback to view video recorded on the current day. A 24/7 recording schedule is enabled at delivery and can be edited under Menu > Storage > Recording.
Access Using a Web Browser
-
- Access the NVR using a Web browser (e.g., Internet Explorer) from a connected computer.
1. Enter the NVR’s IP address in the address bar and then press Enter. Install the plugin as prompted. Close all Web browsers when the installation starts.
2. Open the Web browser and log in with the correct username and password.
- Access the NVR using a Web browser (e.g., Internet Explorer) from a connected computer.
Access from Mobile App
-
- Scan the QR code on the NVR device to download the mobile app. Install the app and sign up for a cloud account. Use the app to scan the QR code again to add the NVR. And then you can access your NVR from your mobile phone anytime anywhere.
- Note: Make sure your NVR is connected to a router with Internet connection. If the app is not available by scanning the QR code, please contact your local dealer.
Shutdown
-
- Use the Shutdown menu instead of by disconnecting power or turning off the power on/off switch. A sudden power failure may cause device damage and loss of data.
Multicast
-
- Multicast can be used to realize live view when the number of
connecting Web clients exceeds the limit the NVR can accommodate.
1. Click System > Network > Multicast.
2. Select the check box to enable multicast, and then enter the
multicast IP and port number.
3. Click Apply to save the settings.
4. Log in to the Web client and set Live View Protocol to Multicast
under Setup > Client
- Multicast can be used to realize live view when the number of
NVR301-04S2-P4 UNV 4 Port PoE NVR
NVR301-04S2-P4 UNV 4 Port PoE NVR, Up to 6MP resolution recording, 1 SATA HDD up to 6 TB, Third-party IP cameras supported with ONVIF
Product SKU: NVR301-04S2-P4 UNV
Product Brand: UNV Uniview
Product Currency: AUD
Product Price: 269
Price Valid Until: 2021-09-30
Product In-Stock: InStock
Editor's Rating:
4.1
4.1
NVR301-04S2-P4 UNV 4 Port PoE NVR
NVR301-04S2-P4 UNV 4 Port PoE NVR, Up to 6MP resolution recording, 1 SATA HDD up to 6 TB, Third-party IP cameras supported with ONVIF
Product SKU: NVR301-04S2-P4 UNV
Product Brand: UNV Uniview
Product Currency: AUD
Product Price: 269
Price Valid Until: 2021-09-30
Product In-Stock: InStock
Editor's Rating:
4.1
4.1
Table of Contents
Reviews
There are no reviews yet.