U-Prox Hub Eth Media converter for the wireless locks subsystems based on U-Prox IP500
Media converter for the wireless locks subsystems based on U-Prox IP500. Using IP standard solutions could be installed in any convenient location. Work with control panels U-Prox IP500 under control of U-Prox IC. ISM band wireless device two-way communication. ISM
Specification
Frequency bands: ITU Region 1 (EU): 868.0-868.6 MHz. ITU Region 2 (USA): 902.5-914.5 MHz. ITU Region 3 (AUS):915.5-927.5 MHz .
Wireless range up to 20m.
Up to 500 control panels U-Prox IP500 per device.
Power supply : U-Prox Hub Eth: up to 3 x 84W – PoE class 1 or USB micro B.
Communication: U-Prox Hub Eth: Ethernet 100Mbit.
Network settings adjustment: Autoconfiguration in LAN. USB micro B.
Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
Max.3000 faces capacity and Max.3000 cards
Supports TCP/IP
Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
Supports ISUP5.0, ISAPI
Configuration via the web client
Face recognition. Distance: 0.3 m to 1.5 m
Two-way audio with client software, indoor station, and main station
$3,299Original price was: $3,299.$2,799Current price is: $2,799.
Dahua DHI-ASI7223X-A-T1 Face Recognition Terminal
Key Features
2.5D curved screen
7-inch LCD display with resolution of 1024 × 600
2MP CMOS, WDR
Auto illumination reduces light pollution
Can hold 100,000 users, 100,000 face images, 100, 000 password, 50 administrators, and 300,000 records
Support face and password unlock and unlock through their combinations
With face detection box; the largest face among faces that appear at the same time is recognized first; the maximum face size can be configured on the web
Face-camera distance: 0.3 m–2.0 m; human height: 0.9 m–2.4 m (lens-ground distance: 1.4 m)
With face recognition algorithm, the terminal can recognize more than 360 positions on human face
Face recognition speed: 0.2 s per face
Support liveness detection
Accurate recognition in backlight and front light
Various unlock status display modes protect user privacy
Support enabling/disabling the temperature monitoring mode; temperature monitoring range is 30°C to 45°C; temperature monitoring distance range is 0.3 m–1.2 m; temperature monitoring error is ≤ 0.5°C; report temperature anomaly alarm
Support mask detection, report alarm of abnormal events without wearing a mask
Support duress alarm and tamper alarm
Support general users, patrol users, VIP users, guest users, and special users
The Fingerprint Module for DS-K1T671M、DS-K1T671TMW,which is also applicable to DS-K1T607TMW,DS-K1T607TE、DS-K1T607PMW、DS-K1T607PE、DS-K1T607MW、DS-K1T607E
Communicates with the access control terminal via RS-485 to execute the commands from the terminal including open door, close door, normally open and normally closed
Collects the door magnetic signal, the exit button signal and the tamper-proof signal and send them to the access control terminal
Supports tampering alarm
Supports RS-485 communication indicators to show the communication status
4-ch DIP switch supporting ID No. configuration
Supports a Wiegand interface to connect a Wiegand card reader to enter/exist access control terminal by swiping card
Hikvision DS-K1T671MF Pro Series Face Recognition Terminal
Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
Max.3000 faces capacity, Max.3000 fingerprints capacity, and Max.3000 cards
Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens, Built-in Mifare card reading module
Two-way audio with client software, indoor station, and main station
Supports TCP/IP
Supports ISUP5.0, ISAPI
Configuration via the web client
Face Recognition Distance: 0.3 m to 1.5 m
Duration < 0.2 s/User
Accuracy rate ≥ 99%; IP65
*Biometric recognition products are not completely applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes
Reviews
There are no reviews yet.