Dahua DHI-VTO4202FB-X Series 2-wire IP Modular Apartment Door Station – Black
System
-
- Main Processor – Embedded processor
- Operating System – Embedded Linux operation system
- Button Type – Mechanical
- Interoperability – ONVIF; CGI
- Network Protocol – SIP; P2P; IPv4; UPnP; DNS; RTSP; RTP; TCP; UDP
Basic
-
- Camera – 1/2.5″ 2MP CMOS low illumination HD colorful fisheye camera
- Field of View – Horizontal: 168.6°; vertical: 87.1; diagonal:176.7°
- Focal Length – 1.9 mm
- WDR – 120 dB
- Noise Reduction – 3D DNR
- Video Compression – H.265
- Video Resolution – 50 Hz:Main stream (720P@25 fps), sub stream (1080P@25 fps)
60 Hz: Main stream (720P@25 fps), sub stream (1080P@25 fps) - Video Frame Rate – 25 fps
- Video Bit Rate – 256 Kbps to 4 Mbps
- Light Compensation – Auto IR
- Day/Night – Auto (ICR)
- Audio Compression – G.711a; G.711u; PCM
- Audio Input – 1 channel
- Audio Output – Built-in speaker
- Audio Mode – two-way voice communication
- Audio Enhancement – Echo suppression/digital noise reduction
- Audio Bit Rate – 16 KHz, 16 Bit
- Status Indicator Light – 3
Port
-
- RS485 Port – 1
- Alarm Output – 1
- Power Output\ – 1-ch 12 VDC 100 mA
- Exit Button – 1
- Door Status Detection – 1
- Lock Control – 1
- Network Port – One RJ45 10 M/100 M network port
General
-
- Appearance color – Black
- Power Supply – Dahua 2-wire switch (max. power supply distance 50 m)
DC 48V 1A, Standard PoE - Power Adapter – Optional
- Installation – Flush/surface mount
- Certifications – CE; FCC; UL
- Accessory – Modular mounting box or rain cover
- Product Dimensions – 100 mm × 100 mm × 36 mm (3.94″ × 3.94″ × 1.41″)
- Protection – IK07; IP65
- Operating Temperature – –30°C to +60°C (–22°F to 140°F)
- Operating Humidity – 10%–90% (RH, non-condensing)
- Operating Altitude – 0 m–3000 m
- Power Consumption – ≤ 12W
- Net Weight – 0.35 kg (0.77 lb)
- Gross Weight – 0.4 kg (0.88 lb)
Ordering Information
-
- DHI-VTO4202FB-P-S2 – Camera module
- DHI-VTO4202FB-MB1 – One-button module
- DHI-VTO4202FB-MB2 – Two-button module
- DHI-VTO4202FB-MB5 – Five-button module
- DHI-VTO4202FB-MS – Display module
- DHI-VTO4202FB-ML – Indicator module
- DHI-VTO4202FB-MK – Keyboard module
- DHI-VTO4202FB-MF – Fingerprint module
- DHI-VTO4202FB-MR – Card swiping module
- DHI-VTO4202FB-MR1 – ID card swiping module
- DHI-VTO4202FB-MN – Blank Module
Accessories
-
- VTM25P2 – Two-modular mounting plate
- VTM24P3 – Three-modular mounting plate
- VTM127 – Two-modular mounting box
- VTM128 – Three-modular mounting box
Rain Cover
-
- VTM26R2 – Surface-mounted rain cover for one 2-module VTO4202FB
- VTM27R3- Surface-mounted rain cover for one 3-module VTO4202FB
- VTM28R4 – Surface-mounted rain cover for multiple 2-module VTO4202FB
- VTM29R6 – Surface-mounted rain cover for multiple 3-module VTO4202FB
- VTM30R2 – Pole-mounted rain cover for 2-module VTO4202FB
Important Safeguards and Warnings
- The following description is the correct application method of the VTO. Read the manual carefully before use, in order to prevent danger and property loss. Strictly conform to the manual during application and keep it properly for future reference.
Operating Requirements
-
- Do not expose the device to direct sunlight or heat source.
- Do not install the device in a humid or dusty area.
- Install the device at stable places horizontally to prevent it from falling.
- Do not drip or splash liquids on the device, or put on the device anything filled with liquids.
- Install the device at well-ventilated places and do not block its vent.
- Use the device only within rated input and output range.
- Do not dismantle the device by yourself. Please use Licensed and Trained Security Installers.
- Transport, use and store the device within allowed humidity and temperature range.
Power Requirements
-
- Use electric wires recommended in your area complying local standards, and within their rated specification.
- Use power supply that meets SELV (safety extra low voltage) requirements, and supply power with rated voltage that conforms to Limited Power Source in IEC60950-1. For specific power supply requirements, see the label on the device.
- Appliance coupler is a disconnecting device. During normal use, keep an angle that facilitates operation.
Features
-
- Video call: Make video calls to indoor monitors (VTHs).
- Group call: Call multiple VTHs simultaneously.
- Video monitoring: Up to 6 VTHs can view the monitoring image of this VTO at the same time.
- Emergency call: Call the management center during an emergency.
- Unlock: Card, fingerprint, password and remote unlock*. (Based on the Modules Selected and Used)
- Alarm: Anti-tampering alarm, door contact alarm and duress password unlock alarm. Alarm information will be sent to the management center.
- Record search: Call records, alarm records and unlock records.
Dahua DHI-VTO4202FB-X Series Black 2-wire IP Modular Apartment Door Station – 3 Module Mounted View
Dahua DHI-VTO4202FB-P-S2 – Camera Module
Dahua DHI-VTO4202FB-MS – Display Module
Dahua DHI-VTO4202FB-MK – Keyboard Module
Dahua DHI-VTO4202FB-MF – Finger Print Module
Dahua DHI-VTO4202FB-MB1 – One-button module
Dahua DHI-VTO4202FB-MB2 – Two-button module
Dahua DHI-VTO4202FB-MB5 – Five-button module
Dahua DHI-VTO4202FB-MB1 – Card swiping module
Dahua DHI-VTO4202FB-MB2 – Id Card swiping module
Dahua DHI-VTO4202FB-MN – Blank Module
Dahua DHI-VTO4202FB-MR – Indicator Module
Dahua DHI-VTO4202FB-X Series Black 2-wire IP Modular Apartment Door Station
Dahua DHI-VTO4202FB-X Series Black 2-wire IP Modular Apartment Door Station, Anodized Access control function, Video intercom function
Product SKU: Dahua DHI-VTO4202FB
Product Brand: Dahua
Product Currency: AIUD
Product In-Stock: InStock
5
Table of Contents
Reviews
There are no reviews yet.