Hikvision DS-3E1105P-EI 4 Port Fast Ethernet Smart PoE Switch

Specification

Network Parameters

• • Ports – 4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
  • MAC Address Table – 2 K
  • Switching Capacity – 10 Gbps
  • Packet Forwarding Rate – 7.44 Mpps
  • Internal Cache – 1 Mbits

PoE Power Supply

• • PoE Standard – IEEE 802.3af,IEEE 802.3at
  • PoE Power Pin – End-span: 1/2(-), 3/6(+)
  • PoE Port – PoE: Ports 1 to 4
  • Max. Port Power – 30 W
  • PoE Power Budget – 60 W

Software Function

• • Long Range
    • Ports 1 to 4: up to 300 m.
    • Long range performance may vary depend on camera model or cable condition.
  • VIP Port – Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
  • Port Isolation
    •  1 to 4: port isolation mode to improve network security
    • Ports in aPortsn isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
  • PoE Watchdog – Ports 1 to 4: auto detect and restart the cameras that do not respond.
  • Link Aggregation
    • Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
    • Support static link aggregation.
    • Support 1 aggregation groups.
  • Loop Prevention
    • Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
    • Support 802.1D STP.
    • Suppport 802.1w RSTP.
  • VLAN
    • VLAN is used for network scale planning and network health improvement.
    • Support 802.1Q.
    • Configurable VLAN ID from 1-4094.
    • Support Trunk, Access port mode.
    • Support Max. 32 VLAN.
  • HPP
    • Support one-click activation and remote management via Hik-Partner Pro.
    • Functions supported:
    • 1. Display the port rate.
    • 2. Display the port bandwidth utilization rate.
    • 3. Display the PoE power usage.
    • 4. Display topology information.
    • 5. Display the alarm status.
    • 6. Restart ports and devices.
    • 7. Enable port long-rage mode.
    • 8. Remotely upgrade the device.
  • System Maintenance
    • Support device management via web.
    • Support DHCP Client. Enabled by default for dynamic assignment of management
    • IP addresses.
    • Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
    • Support management via Hik-Central Pro.
    • Support remote management via Hik-Partner Pro.
    • Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
    • Supports 802.1ab LLDP for peer device discovery.
    • Support port mirroring for fault locating.

General

• • Shell – Metal material
  • Net Weight – 0.26 kg (0.573 lb)
  • Gross Weight – 0.75 kg (1.65 lb)
  • Dimensions (W × H × D) – 121.1 mm × 27.6 mm × 83.1 mm (4.77” × 1.09” × 3.27”)
  • Operating Temperature – 0 °C to 40 °C (32 °F to 104 °F)
  • Storage Temperature – -40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity – 5% to 95% (no condensation)
  • Relative Humidity – 5% to 95% (no condensation)
  • Power Supply – 54 V DC, 1.2 A
  • Installation Mode – Desk-Mounted,Wall-Mounted
  • Max. Power Consumption – 65 W
  • Power Consumption in Idle – 0.9 W
  • Surge Protection – 6 kV

Available Model

• • DS-3E1105P-EI

Hikvision DS-3E1105P-EI 4 Port Fast Ethernet Smart PoE Switch-Isometric View

Hikvision DS-3E1105P-EI 4 Port Fast Ethernet Smart PoE Switch

Hikvision DS-3E1105P-EI 4 Port Fast Ethernet Smart PoE Switch, Support cable detection to locate failure, Up to 300 m Long Range PoE Transmission.

Product SKU: Hikvision DS-3E1105P-EI

Product Brand: Hikvision

Product Currency: AUD

Product Price: 125

Product In-Stock: InStock

Editor's Rating:
5