IPC-T260H-M-HiLook 6MP IR New Advanced IP Turret Camera

Original price was: $149.Current price is: $114.


IPC-T260H-M-HiLook 6MP IR Network Turret Camera

    • 1/2.9″ Progressive Scan CMOS
    • 3072 × 2048@20fps
    • 2.8/4 mm fixed lens
    • Color: 0.028 Lux @ (F2.0, AGC ON), 0 Lux with IR
    • H.265, H.265+, H.264, H.264+
    • Three streams
    • 120dB WDR
    • BLC/3D DNR/ROI/HLC
    • IR range: Up to 30 m
    • Built-in micro SD/SDHC/SDXC card slot, up to 128 GB
    • 3-Axis adjustment
    • Built-in microphone
    • IP66

Share it:
Compare

IPC-T260H-M-HiLook 6MP IR Network Turret Camera

Camera

    • Image Sensor – 1/2.9″ Progressive Scan CMOS
    • Min. Illumination – Color: 0.028 Lux @ (F2.0, AGC ON), 0 Lux with IR
    • Shutter Speed – 1/3 s to 1/100,000 s
    • Slow Shutter – Yes
    • Day & Night – IR Cut Filter
    • WDR – 120 dB
    • Angle Adjustment – Pan: 0° to 360°, tilt: 0° to 75°, rotate: 0° to 360°

Lens

    • Lens Type – Fixed lens, 2.8/4 mm
    • Aperture – F2.0
    • FOV – 2.8 mm: Horizontal FOV: 97° , vertical FOV: 63°, diagonal FOV: 120° 4 mm: Horizontal FOV: 78°, vertical FOV: 50°, diagonal FOV: 97°
    • Lens Mount – M12

Illuminator

    • IR Range – Up to 30 m
    • Wavelength – 850 nm

IPC-T260H-M-HiLook 6MP IR Network Turret Camera Video

    • Max. Resolution – 3072 × 2048
    • Main Stream – 50Hz: 20fps (3072 × 2048, 3072 × 1728, 2944 × 1656), 25fps (2560 × 1440, 1920 ×
      1080, 1280 × 720)
      60Hz: 20fps (3072 × 2048, 3072 × 1728, 2944 × 1656), 30fps (2560 × 1440, 1920 ×1080, 1280 × 720)
    • Sub Stream – 50Hz: 25fps (640 × 480, 640 × 360, 320 × 240)
      60Hz: 30fps (640 × 480, 640 × 360, 320 × 240)
    • Third Stream – 50Hz: 25fps (1280 × 720, 640 × 360, 352 × 288)
      60Hz: 30fps (1280 × 720, 640 × 360, 352 × 240)
    • Video Compression –  Main stream/third stream: H.265/H.264 ;Sub-stream: H.265/H.264/MJPEG
    • H.264 Type – Main Profile/High Profile
    • H.264+ – Main stream supports
    • H.265 Type – Main Profile
    • H.265+ – Main stream supports
    • Video Bit Rate – 32 Kbps to 16 Mbps
    • Scalable Video Coding(SVC) – H.264 and H.265 encoding

IPC-T260H-M-HiLook 6MP IR Network Turret Camera Audio

    • Audio Compression – G.711/G.722.1/G.726/MP2L2/PCM/MP3
    • Audio Bit Rate – 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2)/8Kbps-320Kbps(
      MP3)
    • Environment Noise Filtering – Yes
    • Audio Sampling Rate – 8 kHz/16 kHz/32 kHz/44.1 kHz/48 kHz

IPC-T260H-M-HiLook 6MP IR Network Turret Camera Smart Feature-Set

    • Smart Event – Line crossing detection
    • Basic Event – Motion detection, video tampering alarm, exception (network disconnected, IP address conflict, illegal login, HDD full, HDD error)
    • Linkage Method – Upload to FTP/NAS/memory card, notify surveillance center, send email, trigger recording, trigger capture
    • Region of Interest – 1 fixed region for main stream and sub-stream

IPC-T260H-M-HiLook 6MP IR Network Turret Camera Image

    • Image Enhancement – BLC, HLC, 3D DNR
    • Image Setting – Rotate mode, saturation, brightness, contrast, sharpness, AGC and white balance adjustable by client software or web browser
    • Day/Night Switch – Day/Night/Auto/Schedule

IPC-T260H-M-HiLook 6MP IR Network Turret Camera Network

    • Network Storage – microSD/SDHC/SDXC card (128 GB), local storage and NAS (NFS,SMB/CIFS), ANR Together with high-end Hikvision memory card, memory card encryption and health detection are supported.
    • Protocols – TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP™, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour, SSL/TLS
    • API – ONVIF (PROFILE S, PROFILE G), ISAPI, SDK
    • Security – Password protection, complicated password, HTTPS encryption, 802.1X authentication(EAP-MD5) , watermark, IP address filter, basic and digest authentication for HTTP/HTTPS, WSSE and digest authentication for ONVIF, TLS1.2
    • Simultaneous Live View – Up to 6 channels
    • User/Host – Up to 32 users, 3 levels: administrator, operator and user
    • Client – HiLookVision PC Client, HiLookVision App
    • Web Browser – Plug-in required live view: IE8+, Chrome 41.0-44, Mozilla Firefox30.0-51, Safari8.0-11 Plug-in free live view: Chrome 45.0+, Mozilla Firefox52.0+

IPC-T260H-M-HiLook 6MP IR Network Turret Camera Interface

    • Communication Interface – 1 RJ45 100M self-adaptive Ethernet port
    • Audio – 1 audio input (built-in microphone), mono sound
    • Video Output – No
    • Interface Style – Pigtail style interface
    • On-board storage – Built-in micro SD/SDHC/SDXC slot, up to 128 GB

General

    • Firmware Version – 5.5.83
    • Web Client Language – 32 languages; English, Russian, Estonian, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Danish, Swedish, Norwegian, Finnish, Croatian, Slovenian, Serbian, Turkish, Korean, Traditional Chinese, Thai, Vietnamese, Japanese, Latvian, Lithuanian, Portuguese (Brazil)
    • General Function –  Anti-flicker, three streams, heartbeat, mirror, 4 regions of privacy mask
    • Reset – Reset via reset button on camera body, web browser and client software
    • Startup and Operating Conditions – -30 °C to 60 °C (-22 °F to 140 °F), humidity 95% or less (non-condensing)
    • Storage Conditions – -30 °C to 60 °C (-22 °F to 140 °F), humidity 95% or less (non-condensing)
    • Power Supply – 12 VDC ± 25%, Φ 5.5 mm coaxial power plug; PoE (802.3af, class 3)
    • Power Consumption and Current – 12 VDC, 0.5 A, max. 6 W; PoE (802.3af, 36 V to 57 V), 0.3 A to 0.2 A, max. 7.5 W
    • Material – Metal
    • Dimensions – Camera: Φ 127.3 × 95.9 mm (5″ × 3. 8″);With package: 150 × 150 × 141 mm (5.9″ × 5.9″ × 5.6″)
    • Weight – Camera: Approx. 635 g (1.4 lb.); With package: Approx. 890 g (1.96 lb.)

IPC-T260H-M-HiLook 6MP IR Network Turret Camera Approval

    • EMC – 47 CFR Part 15, Subpart B; EN 55032: 2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013,
      EN 50130-4: 2011 +A1: 2014; AS/NZS CISPR 32: 2015; ICES-003: Issue 6, 2016; KN 32:
      2015, KN 35: 2015
    • Safety – UL 60950-1, IEC 60950-1:2005 + Am 1:2009 + Am 2:2013, EN 60950-1:2005 + Am
      1:2009 + Am 2:2013, IS 13252(Part 1):2010+A1:2013+A2:2015
    • Chemistry – 2011/65/EU, 2012/19/EU, Regulation (EC) No 1907/2006
    • Protection – Ingress protection: IP66 (IEC 60529-2013)

Available Model

    • IPC-260H-MU (2.8/4 mm)

Accessory

    • DS-1273ZJ-130-TRL Wall Mount
    • DS-1273ZJ-130B-TRL Wall Mount
    • DS-1276ZJ-SUS – Corner Mount
    • DS-1275ZJ-SUS – Vertical Pole Mount
    • DS-1280ZJ-DM8 – Junction Box
    • DS-1281ZJ-M – Inclined Ceiling Mount
    • DS-1271ZJ-130-TRL Pendant Mount

IPC-T260H-M-HiLook 6MP IR Network Turret Camera

IPC-T260H-M-HiLook 6MP IR Network Turret Camera Isometric view

IPC-T260H-M-HiLook 6MP IR Network Turret Camera Isometric view

IPC-T260H-M-HiLook 6MP IR Network Turret Camera

How to Install IP Turret Camera

Setting the Network Camera over the LAN

    • Purpose:
      To view and configure the camera via a LAN, you need to connect the network camera in the same subnet with your computer, and install the SADP or HiLookVision software to search and change the IP of the network camera.
      Note: For the detailed introduction of SADP
    •  Wiring over the LAN
      The two ways of cable connection of a network camera and a computer:
    • Purpose:
      To test the network camera, you can directly connect the network camera to the
      computer with a network cable

Activating the Camera

    • You are required to activate the camera first by setting a strong password for it before
      you can use the camera.
    • Activation via Web Browser, Activation via SADP, and Activation via Client Software
      are all supported.
      Activation via Web Browser
      Steps:
      1. Power on the camera, and connect the camera to the network.
      2. Input the IP address into the address bar of the web browser, and click Enter to enter the activation interface.
      Notes: The default IP address of the camera is 192.168.1.64. For the camera enables the DHCP by default, the IP address is allocated automatically. And you need to activate the camera via SADP software.

Setting the Network Camera over the WAN

    • Purpose:
      This section explains how to connect the network camera to the WAN with a static IP
      or a dynamic IP.
      Static IP Connection
      Before you start:
      Please apply a static IP from an ISP (Internet Service Provider). With the static IP
      address, you can connect the network camera via a router or connect it to the WAN
      directly.
      Connecting the network camera via a router
      Steps:
      1. Connect the network camera to the router.
      2. Assign a LAN IP address, the subnet mask and the gateway.
      3. Save the static IP in the router.
      4. Set port mapping, e.g., 80, 8000, and 554 ports. The steps for port mapping vary according to the different routers. Please call the router manufacturer for assistance with port mapping.
      5. Visit the network camera through a web browser or the client software over the internet.
      6.Connecting the network camera with static IP directly
      You can also save the static IP in the camera and directly connect it to the internet without using a router.

Dynamic IP Connection

    • Before you start:
      Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect
      the network camera to a modem or a router.
      Connecting the network camera via a router
      Steps:
      1. Connect the network camera to the router.
      2. In the camera, assign a LAN IP address, the subnet mask and the gateway.
      3. In the router, set the PPPoE user name, password and confirm the password.
      4. Set port mapping. E.g. 80, 8000, and 554 ports. The steps for port mapping vary
      depending on different routers. Please call the router manufacturer for assistance
      with port mapping.
      5. Apply a domain name from a domain name provider.
      6. Configure the DDNS settings in the setting interface of the router.
      7. Visit the camera via the applied domain name.
    • Connecting the network camera via a modem
      • Purpose:
        This camera supports the PPPoE auto dial-up function. The camera gets a public IP
        address by ADSL dial-up after the camera is connected to a modem. You need to
        configure the PPPoE parameters of the network camera.
      • Note: The obtained IP address is dynamically assigned via PPPoE, so the IP address
        always changes after rebooting the camera. To solve the inconvenience of the
        dynamic IP, you need to get a domain name from the DDNS provider (E.g.
        DynDns.com). Please follow the steps below for normal domain name resolution and
        private domain name resolution to solve the problem.
      • Normal Domain Name Resolution
        Steps:
        1. Apply a domain name from a domain name provider.
        2. Configure the DDNS settings in the DDNS Settings interface of the network
        camera.
        3. Visit the camera via the applied domain name.
      • Private Domain Name Resolution
        Steps:
        1. Install and run the IP Server software in a computer with a static IP.
        2. Access the network camera through the LAN with a web browser or the client
        software.
        3. Enable DDNS and select IP Server as the protocol type.

 

IPC-T260H-M-HiLook 6MP IR Network Turret Camera

IPC-T260H-M-HiLook 6MP IR Network Turret Camera, Progressive Scan CMOS, Color: 0.028 Lux , IR range: 30m, Built-in microphone,IP66

Product SKU: IPC-T260H-M-HiLook

Product Brand: HiLook

Product Currency: AUD

Product Price: 192

Price Valid Until: 2021-04-30

Product In-Stock: InStock

Editor's Rating:
5
Weight 0.890 kg
Dimensions 150 × 150 × 141 mm
Lens

2.8mm, 4.0mm

Color

BLACK, WHITE

IPC-T260H-M-HiLook Data Sheet

Download IPC-T260H-M HiLook Data Sheet

IPC-T260H-M-HiLook 6MP IR Network Turret Camera

IPC-T260H-M-HiLook 6MP IR Network Turret Camera, Progressive Scan CMOS, Color: 0.028 Lux , IR range: 30m, Built-in microphone,IP66

Product SKU: IPC-T260H-M-HiLook

Product Brand: HiLook

Product Currency: AUD

Product Price: 192

Price Valid Until: 2021-04-30

Product In-Stock: InStock

Editor's Rating:
5

Reviews

There are no reviews yet.

Be the first to review “IPC-T260H-M-HiLook 6MP IR New Advanced IP Turret Camera”