Ruijie Reyee RG-AP820-L V3 Wi-Fi 6 Dual-Radio Settled Access Point
Specifications
Hardware Specifications
-
- Dimensions and Weight
- Unit dimensions (W x D x H) – 220 mm x 220 mm x 49 mm (8.66 in x 8.66 in x 1.93 in)
- Shipping dimensions (W x D x H) – 507 mm x 319 mm x 278 mm (19.96 in x 12.56 in x 10.94 in)
- Unit weight
- Main unit: 0.6 kg (1.33 lbs)
- Mounting bracket: 0.07 kg (0.15 lbs)
- Shipping weight – 1.04 kg (2.29 lbs)
- Mounting – Wall/Ceiling-mount (a mounting bracket is delivered with the main unit)
- Lock option – Kensington lock and securing latch
- Dimensions and Weight
Wi-Fi Radio
-
- Radio design
- Dual-radio and up to four spatial streams:
- Radio 1: 2.4 GHz, two spatial streams, 2×2 MU-MIMO
- Radio 2: 5 GHz, two spatial streams, 2×2 MU-MIMO
- Operating frequencies
- Radio 1, 802.11b/g/n/ax:
- 2.400 GHz to 2.4835 GHz, ISM
- Radio 2, 802.11a/n/ac/ax:
- 5.150 GHz to 5.250 GHz, U-NII-1
- 5.250 GHz to 5.350 GHz, U-NII-2A
- 5.470 GHz to 5.725 GHz, U-NII-2C
- 5.725 GHz to 5.850 GHz, U-NII-3/ISM
- Note: Country-specific restrictions apply.
- Data rates
- Combined peak data rate: 2.976 Gbps
- 2.4 GHz radio
- Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (max.)
- Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)
- 5 GHz radio
- Two spatial stream Single User (SU) MIMO for up to 2.4 Gbps wireless data rate to individual 2SS HE160 802.11ax client devices (max.)
- Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)
- Data rate set
- The following 802.11-compliant data rates in Mbps are supported:
- 2.4 GHz radio
- 802.11b: 1, 2, 5.5, 11
- 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
- 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
5 GHz radio - 802.11a: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
- 802.11ac: 6.5 to 1,732 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160)
- 802.11ax: 8.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160)
- Packet aggregation – 802.11n/ac/ax: A-MPDU and A-MSDU
- Antenna type – Built-in omnidirectional antenna (two 2.4 GHz antennas and two 5 GHz antennas)
- Max. antenna gain
-
- 2.8 dBi in 2.4 GHz and 3.6 dBi in 5 GHz
- The downtilt angle for the maximum gain is roughly 30 degrees.
- With reference to the pattern of each antenna of the MIMO radios, the maximum gain of the effective per-antenna pattern is 2.3 dBi in the 2.4 GHz radio and 2.7 dBi in the 5 GHz radio.
-
- Max. transmit power
- 2.4 GHz radio: 26 dBm (23 dBm per chain)
- 5 GHz radio: 26 dBm (23 dBm per chain)
- Note: The transmit power is limited by local regulatory requirements.
- Power increment – Configurable in increments of 1 dBm
- Radio technologies
- 802.11b: Direct-Sequence Spread-Spectrum (DSSS)
- 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
- 802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)
- Modulation types
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
- 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
- Radio design
Bluetooth Radio
-
- Bluetooth – Bluetooth 5.1
- Antenna type – Onboard omnidirectional antenna
- Max. antenna gain – 2.4 dBi, with a downtilt angle of roughly 30 degrees
- Max. transmit power
- 17 dBm (GFSK)
- 14 dBm (π/4-DQPSK, 8-DPSK)
- Receive sensitivity
- –95.5 dBm (DH5)
- –95 dBm (π/4-DQPSK)
- –87.5 dBm (8-DPSK)
Ports
-
- Fixed service port
- 1 x 10/100/1000Base-T RJ45 Ethernet port with auto-negotiation
- Compliance with IEEE 802.3af standard (PoE)
- Auto MDI/MDIX crossover
- PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher)
- 802.3az EEE
- 1 x 2.5GE SFP combo port compatible with 1GE
- Fixed management port – 1 x RJ45 console port (serial console port)
- Status LED – 1 x multi-color system status LED
- Button
- 1 x Reset button
- Press the button for shorter than 2 seconds. Then the device restarts.
- Press the button for longer than 5 seconds. Then the device restores to factory settings.
- Fixed service port
Power Supply and Consumption
-
- Input power supply
- The AP supports the following two power supply modes:
- 48 V DC/0.6 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.
- PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE).
- If both DC power and PoE are available, DC power is preferred.
- Power consumption
- Max power consumption: 12.95 W
- DC powered: 12.95 W
- PoE powered (802.3af): 12.95 W
- PoE+ powered (802.3at): 12.95 W
- PoE++ powered (802.3bt): 12.95 W
- Idle mode: 6 W
- Input power supply
Environment and Reliability
-
- Temperature
- Operating temperature: –10°C to +50°C (14°F to +122°F)
- Storage temperature: –40°C to +70°C (–40°F to +158°F)
- Note: At an altitude between 3,000 m (9,843 ft) and 5,000 m (16,404 ft), every time the altitude increases by 220m (722 ft), the maximum temperature decreases by 1°C (1.8°F).
- Humidity
- Operating humidity: 0% to 95% RH (non-condensing)
- Storage humidity: 0% to 95% RH (non-condensing)
- Environment standard
- Storage and operating environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995
- Mean Time Between Failure (MTBF) 200,000 hours (22 years) at the operating temperature of 25°C (77°F)
- Security regulations – GB 4943.1, IEC 62368-1
- EMC regulations
- EN 300386, GB/T 19286, GB/T 17618
- FCC Part 15
- Radio frequency regulations – FCC Part 15E: 15.407
- Temperature
Certifications and Regulatory
-
- Regulatory compliance
- EN 55032
- EN 55035
- EN 61000-3-3
- EN IEC 61000-3-2
- EN 301 489-1
- EN 301 489-3
- EN 301 489-17
- EN 300 328
- EN 301 893
- EN 300 440
- FCC Part 15
- EN IEC 62311
- IEC 62368-1
- EN 62368-1
- Certifications
- Wi-Fi Alliance:
- 2.4 GHz and 5 GHz Spectrum Capabilities
- Wi-Fi CERTIFIED a, b, g, n, ac, ax (6)
- WPA2™-Enterprise 2018-04
- WPA2™-Personal 2018-04
- WPA3™-Personal 2019-08
- WPA™-Enterprise
- WPA™-Personal
- WMM®, Wi-Fi Agile Multiband™
- Regulatory compliance
Software Specifications
-
- Applicable software version – RGOS11.9(6)W1B4 or higher
WLAN
-
- Max. number of associated STAs – 256 (up to 128 STAs per radio)
- Max. number of BSSIDs – 32 (up to 16 BSSIDs per radio)
- STA management
- SSID hiding
- Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes
- independently.
- Remote intelligent perception technology (RIPT)
- Intelligent client identification technology
- Intelligent load balancing based on the STA quantity or traffic
- STA limiting
- SSID-based STA limiting
- Radio-based STA limiting
- Bandwidth limiting – STA/SSID/AP-based rate limiting
- Wireless roaming – Layer 2 and Layer 3 roaming
Security
-
- Authentication and encryption
- Remote Authentication Dial-In User Service (RADIUS)
- PSK and web authentication
- QR code-based guest authentication, SMS authentication, MAB authentication (used with the wireless access controller)
- RG-WS series – Data encryption: WPA-TKIP, WPA-PSK, WPA2-AES, WEP (64/128-bit)
- Data frame filtering – Allowlist, static blocklist, and dynamic blocklist
- WIDS
- User isolation
- Rogue AP detection and containment
- ACL – Dynamic ACL assignment
- CPP – Supported
- NFPP – Supported
- Authentication and encryption
Routing and Switching
-
- IP service
- Static IPv4 address
- IPv4 DHCP Client
- FTP ALG and DNS ALG
- Multicast – Multicast-to-unicast conversion
- IPv6 basics
- IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping
- IPv6 DHCP Client
- IP routing – IPv4/IPv6 static routing
- VPN
- PPPoE Client
- IPsec VPN
- IP service
Management
-
- Network management
- SNMPv1/v2c/v3
- Fault inspection and alarm
- Information statistics and logging
- Network management platform
- Ruijie Cloud
- Web-based management (Eweb)
- User access management – Telnet, SSH, and TFTP-based management
- Fat/Fit/Cloud mode switchover
- When the AP works in Fit mode, it can be switched to Fat mode through an AC.
- When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.
- When the AP works in Cloud mode, it can be managed through Ruijie Cloud.
- Network management
Available Model
Ruijie Reyee RG-AP820-L V3 Wi-Fi 6 Dual-Radio Settled Access Point-Isometric View
Ruijie Reyee RG-AP820-L(V3) Wi-Fi 6 Dual-Radio Settled Access Point
Ruijie Reyee RG-AP820-L(V3) Wi-Fi 6 Dual-Radio Settled Access Point, Next-generation AX3000 chip, supporting 160 MHz 2975 Mbps
Product SKU: Ruijie Reyee RG-AP820-L(V3) Wi-Fi 6 Dual-Radio Settled Access Point
Product Brand: Ruijie Reyee
Product Currency: AUD
Product Price: 499
Product In-Stock: InStock
5
Ruijie Reyee RG-AP820-L V3 Wi-Fi 6 Dual-Radio Settled Access Point
Ruijie Reyee RG-AP820-L V3 Wi-Fi 6 Dual-Radio Settled Access Point, Next-generation AX3000 chip, supporting 160 MHz 2975 Mbps
Product SKU: Ruijie Reyee RG-AP820-L V3
Product Brand: Ruijie Reyee
Product Currency: AUD
Product Price: 499
Product In-Stock: InStock
5
Table of Contents
Reviews
There are no reviews yet.