Tp-Link TL-SG1005P-PD 5-Port Gigabit Desktop PoE+ Switch with 1-Port PoE++ In and 4-Port PoE+ Out
Overview
-
- TL-SG1005P-PD is an unmanaged switch with 5 Gigabit ports that requires no AC or DC power supply. It provides 1 PoE (Power over Ethernet) IN port and 4 PoE OUT ports. It can automatically detect and get power from all IEEE 802.3af/at/bt compliant Power Sourcing Equipment (PSE) at port 5 and provide power for IEEE 802.3af/at compliant Powered Devices (PDs) at port 1-4. In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
Power Over Ethernet
-
- 5 RJ45 ports (port 1 to port 5) of the switch support Power over Ethernet (PoE) function. They can automatically detect and get power from all IEEE 802.3af/at/bt compliant Power Sourcing Equipment (PSE) at port 5 and provide power for IEEE 802.3af/at compliant Powered Devices (PDs) at port 1-4.
Overload Arrangement
-
- TL-SG1005P-PD has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption exceeds the PoE power budget, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.
Intelligent Power Management
-
- Priority (port 1 > port 2 > port 3 > port 4): This function will help protect the system when the system power is overloaded. For example. if the switch is powered by 802.3bt (type 4) with port 1, 2 and 4 consuming 15.4 W respectively, and an additional PoE device with 20 W is connected to port 3, the system will cut off the power of port 4 to compensate for the overload.
Highlight Performance
-
- Up to 250 m PoE power supply and data transmission under Extend Mode** for port 1-2.
- With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD) for port 1-4. When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically.
Easy to Use
-
- TL-SG1005P-PD is easy to install and use. It requires no configuration and installation. With desktop
and wall mountable design, outstanding performance and quality, the TP-Link 5-Port Gigabit Desktop
PoE+ Switch with 1-Port PoE++ In and 4-Port PoE+ Out TL-SG1005P-PD is a great selection for
expanding your network.
- TL-SG1005P-PD is easy to install and use. It requires no configuration and installation. With desktop
Specifications
Hardware Features & Performance
-
- Standards
- IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af,
- IEEE 802.3at, (For PoE IN Port only) IEEE 802.3bt
- Network Ports – 5 10/100/1000 Mbps RJ45 Ports;
- Network Media (Cable) – UTP/STP of Cat. 5E or above (based on the standards that the connected devices comply with)
- PoE INPUT – Compliance with 802.3af/at/bt
- PoE OUTPUT – Compliance with 802.3af/at
- PoE Budget – 802.3af (type 1): 9W 802.3at (type 2): 21W 802.3bt (type 3): 47W 802.3bt (type 4): 66W
- Auto-Negotiation – YES
- Auto MDI/MDIX – YES
- PoE Power on RJ45
- Port 1-4:
- Power+: pin 3 & pin 6
- Power -: pin 1 & pin 2
- Max Power Consumption
- 2.68 W (90W PoE In, with no PD connected)
- 68.59 W (90W PoE In, with 66 W PD connected)
- Max Heat Dissipation
- 9.11 BTU/h (90W PoE In, with no PD connected)
- 233.21 BTU/h (90W PoE In, with 66 W PD connected)
- Forwarding Mode – Store and Forward
- Switch Capacity – 10 Gbps
- Packet Forwarding Rate – 7.44 Mpps
- MAC Address Table – 2K, Auto-learning, Auto-aging
- Extend Mode – YES (for Ports 1–2)
- PoE Auto Recovery – YES (for Ports 1-4)
- Flow Conrol – YES
- Fanless – YES
- LED – Power, Link/Act, PoE in Status, PoE MAX
- Dimensions – 6.2×4.0x1.0 in (158x101x25 mm)
- Certification – CE, FCC
- Environment
- Operating Temperature: -30°C to 70°C (-22°F to 158°F)
- Storage Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Humidity: 10% to 90% RH, non-condensing
- Storage Humidity: 5% to 90% RH, non-condensing
- Standards
Available Model
Tp-Link TL-SG1005P-PD 5-Port Gigabit Desktop PoE+ Switch with 1-Port PoE++ In and 4-Port PoE+ Out-Isometric View
Tp-Link TL-SG1005P-PD 5-Port Gigabit Desktop PoE+ Switch with 1-Port PoE++ In and 4-Port PoE+ Out
Tp-Link TL-SG1005P-PD 5-Port Gigabit Desktop PoE+ Switch with 1-Port PoE++ In and 4-Port PoE+ Out, PoE Auto Recovery, Long-Range PoE+.
Product SKU: Tp-Link TL-SG1005P-PD
Product Brand: Tp-Link
Product Currency: AUD
Product Price: 66
Product In-Stock: InStock
5
Table of Contents
Reviews
There are no reviews yet.