Hikvision DS-K2M061 Secure Door Control Unit

• • Communicates with the access control terminal via RS-485 to execute the commands from the terminal including open door, close door, normally open and normally closed
  • Collects the door magnetic signal, the exit button signal and the tamper-proof signal and send them to the access control terminal
  • Supports tampering alarm
  • Supports RS-485 communication indicators to show the communication status
  • 4-ch DIP switch supporting ID No. configuration
  • Supports a Wiegand interface to connect a Wiegand card reader to enter/exist access control terminal by swiping card
  • Fire interface and exit button linkage

Hikvision DS-K1802M Mifare Card Reader

• • Mifare1/ EM card reader
  • PC+ABS material shell
  • Built-in audible beeper
  • Wiegand interface
  • IP65

Hikvision DS-KAB6-D1 Access Control Desktop Bracket

Key Features

• • Hikvision
  • Access control desktop stand
  • Suitable for DS-K1T673x and DS-K1T680x models
  • Dimensions: 216 (H) x 128 (W) x 134 (D) mm
  • Made of ABS

Hikvision DS-KAB671-S Protective Shield

• • Protective Shield for DS-K1T671 Face Recognition Terminal
  • Material – PC
  • Weight – 172 g (0.4 lb)
  • Dimension (W × H × D) – 135 mm × 250 mm × 80 mm (5.3″ × 9.8″ × 3.1″)

U-Prox IP500 Operates under control of a U-Prox IC L network controller

• • Wireless Door Smart Lock ISM device two-way RF communication
  • Frequency band 915.5-927.5 MHz
  • Wireless range up to 20m
  • Built-in keypad and RF ID reader
  • Read Range: up to 40mm
  • 3000 tags
  • Power supply – 3 AAA batteries (included)
  • 32,000 openings, up to 2 years life
  • One end-of-line resistor supervised input
  • Request-to-exit on inner door handle
  • Adjusted with U-Prox IP software
  • Real-time clock
  • Non-volatile memory:

Dahua DHI-ASI7213X-T1 Face Recognition Access Controller

Key Features

• • 2.5D curved screen
  • 7-inch LCD display with resolution of 1024 × 600
  • 2MP CMOS, WDR
  • Auto illumination reduces light pollution
  • Can hold 100,000 users, 100,000 face images, 100,000 cards, 100,000 password, 50 administrators, and 300,000 records
  • Support face, IC card, password unlock and unlock through their combinations
  • With face detection box; the largest face among faces that appear at the same time is recognized first; the maximum face size can be configured on the web
  • Face-camera distance: 0.3 m–2.0 m; human height: 0.9 m–2.4 m (lens-ground distance: 1.4 m)
  • With face recognition algorithm, the terminal can recognize more than 360 positions on human face
  • Face recognition speed: 0.2 s per face
  • Support liveness detection
  • Accurate recognition in backlight and front light
  • Various unlock status display modes protect user privacy
  • Support enabling/disabling the temperature monitoring mode; temperature monitoring range is 30°C to 45°C; temperature monitoring distance range is 0.3 m–1.8 m; temperature monitoring error is ≤ 0.5°C; report temperature anomaly alarm
  • Support mask detection, report alarm of abnormal events without wearing a mask
  • Support duress alarm, tamper alarm, intrusion alarm, door contact timeout alarm, and illegal card exceeding threshold alarm
  • Support general users, patrol users, VIP users, guest users, and special users

Hikvision DS-K2604-G Four Door Access Controller

• • 100,000 cards and 300,000 events storage
  • Communication via TCP/TP, ISUP5.0 and RS-485
  • ISAPI, OSDP supported
  • 4 door access control
  • Alarm input/output and alarm event upload
  • RS-485 interface and Wiegand interface for accessing card reader
  • UL294 Standard Qualified
  • Supports battery access

Hikvision DS-K1T341AM Face Recognition Terminal

• • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
  • Max.3000 faces capacity and Max.3000 cards
  • Supports TCP/IP
  • Face Recognition Terminal, 4.3-inch LCD touch screen,2 Mega pixel wide-angle lens,Built-in Mifare card reading module
  • Supports ISUP5.0, ISAPI
  • Configuration via the web client
  • Face recognition. Distance: 0.3 m to 1.5 m
  • Two-way audio with client software, indoor station, and main station
  • Duration ＜ 0.2 s/User
  • Accuracy rate ≥ 99%; IP65

Hikvision DS-K1T671TM-3XF Face Recognition Terminal

Key Features

• • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
  • Recognition distance: 0.3 to 2 m
  • Face mask detection
  • Displays temperature measurement results on the authentication page
  • 7-inch LCD touch screen,2 Mega pixel wide-angle lens
  • Built-in Mifare card reading module
  • Face recognition duration ＜ 0.2 s/User

ABB M22481-W Video Indoor Station 4.3

• • Mounting Type – Surface mounted (plaster)
  • Material – Plastic
  • Broadcast Standard – PAL
  • Color – White
  • Screen Size – 4.3 in

ABB M22413-W Video Indoor Station 7 with Integrated T-loop

• • Communication Interface – DECT
  • Mounting Type – Surface Mounted
  • Material – Plastic
  • Broadcast Standard – PAL
  • Color – White
  • Number of Batteries – 0
  • Screen Size – 7 in

Hikvision DS-K2M0016A Distributed Elevator Controller

• • RS-485 communication with the master elevator controller
  • Connectable with up to 16 relays to control the floor buttons in the elevator. Three types of
    relays are supported: Button Relay, Call Elevator Relay and Auto Button Relay
  • DIP switch settings for device address and relay types. Supports 3 relay types: Call Elevator,
    Button, and Auto Button)
  • Up to 8 distributed elevator controllers can be linked to the master elevator controller (DS-K2210)
  • Control the elevator via the relay
  • Supports master elevator controller linkage, reporting the event to the system