Ruijie Reyee RG-AP820-L V2 Wireless Access Point

Technical Specifications

Hardware specifications

• • Radio
    • Dual-radio dual-band:
    • Radio 1: 2.4G 11ax/5G 11ax: 2×2 MIMO
    • Radio 2: 5G 11ax: 2×2 MIMO
  • Protocol – Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac
  • Operating Bands
    • 802.11b/g/n/ax: 2.4G ~ 2.483GHz
    • 802.11a/n/ac/ax: 5.150~5.350GHz, 5.47~5.725GHz, 5.725~5.850GHz (vary depending on different countries)
  • Spatial Streams – Up to 4: 2×2:2 in 2.4GHz , 2×2:2 in 5GHz
  • Max Throughput
    • Maximum throughput (5G+5G mode) per AP: 2.4Gbps
    • Radio1: 5G low band 1.2Gbps
    • Radio2: 5G high band 1.2Gbps
    • 2.4G+5G operation mode, maximum throughput per AP: 1.775Gbps
    • Radio1: 2.4G 0.574Gbps
    • Radio2: 5G 1.2Gbps
  • Modulation
    • OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
    • DSSS: DBPSK@1Mbps, DQPSK@2Mbps, and [email protected]/11Mbps
    • MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM
    • OFDMA (up to 1024-QAM)
  • Receiver Sensitivity
    • 11b: -96dBm (1Mbps), -93dBm (5Mbps), -89dBm (11Mbps)
    • 11a/g: -91dBm (6Mbps), -85dBm (24Mbps), -80dBm (36Mbps), -74dBm (54Mbps)
      11n: -90dBm (MCS0), -70dBm (MCS7), -89dBm (MCS8), -68dBm (MCS15)
    • 11ac HT20: -88dBm (MCS0), -63dBm (MCS9)
    • 11ac HT40: -85dBm (MCS0), -60dBm (MCS9)
    • 11ac HT80: -82dBm (MCS0), -57dBm (MCS9)
    • 11ax HT80: -82dBm (MCS0), -57dBm (MCS9), -52dBm (MCS11)
  • Antenna – Integrated antenna design
  • Antenna Gain
    • 2.4G: 3dBi
    • 5G: 3dBi
  • Service Ports – 1 10/100/1000M Ethernet ports, PoE In
  • Management Port – 1 console port
  • Reset Button – Support
  • Anti-theft Lock – Support
  • LED Indicator – 1 LED indicator (Support red, green, blue, orange and flashing mode, whicindicates device access)
  • Transmit Power – ≤100mw (20dBm) (vary depending on different countries)
  • Adjustable Power – 1dBm
  • Power Supply – Local power supply (DC 48V/1A) (DC Power adapters should be purchasefrom third-party vendors separately if needed.) PoE (802.3af) – full spectrum operation
  • Power Consumption – <12.95W

Physical Specifications

• • Temperature
    • Operating Temperature: -10°C to 50°C
    • Storage Temperature: -40°C to 70°C
  • Humidity
    • Operating Humidity: 5% to 95% (non-condensing)
    • Storage Humidity: 5% to 95% (non-condensing)
  • Installation Mode – Ceiling/wall-mountable
  • Dimensions (W x D x H) – 153mm ×193mm x26mm (Height of the AP only, excluding the mount kit)
  • Weight – ≤0.5kg (include mount kit)
  • IP Rating – IP41
  • Certifications and Compliance
  • Wi-Fi Alliance
    • Wi-Fi CERTIFIED™ a, b, g, n, ac
    • Wi-Fi CERTIFIED 6™
    • WPA3™-Enterprise, Personal
    • Wi-Fi Enhanced Open™
    • Wi-Fi Agile Multiband™
    • WMM®
  • Safety Standard – GB4943, EN/IEC 62368-1
  • EMC Standard – GB9254, EN301 489
  • Radio Standard – SRRC, EN300 328, EN301 893

Software Specification

WLAN

• • Maximum clients per AP – 1024 (Recommended Client: 64)
  • BSSID capacity – Up to 32
  • SSID hiding – Support
  • 5G Priority (Band Steering) – Support
  • Configuring the authentication mode, encryption mechanism and VLAN attributes for each
    SSID – Support
  • Remote Intelligent Perception Technology (RIPT) – Support
  • Intelligent device recognition technology – Support
  • Intelligent load balancing based on the number of users or traffic – Support
  • STA control – SSID/radio-based
  • Bandwidth control – STA/SSID/AP-based bandwidth con
  • Data encryption – WPA (TKIP), WPA-PSK, WPA2 (AES),
  • PSK and web authentication – Support
  • PPSK authentication (For Employee) – Support (require wireless controller)
  • 802.1x authentication – Support
  • PEAP authentication – Support
  • Data frame filtering – Whitelist, static/dynamic blacklist
  • User isolation – Support
  • Rogue AP detection and countermeasure – Support
  • Dynamic ACL assignment – Support
  • RADIUS – Support
  • CPU Protection Policy (CPP) – Support
  • Network Foundation Protection Policy (NFPP) – Support

IP

• • IPv4 and IPv6 address – Support
  • Multicast routing – Multicast to unicast conversion
  • DHCP service – DHCP Snooping, Option 82, Server, Client

Management and Maintenance

• • Supported wireless LAN controllers
    • Ruijie WS Series Wireless Controller
    • Ruijie MACC-Base Software Controller
    • Ruijie Cloud (Public Cloud)
  • Management protocol – Telnet, SSH, TFTP, Web
  • Wireless Intelligent AI Optimization Service (WIS) – Support
  • SNMP – SNMPV1,V2c,V3
  • LLDP – LLDP, LLDP-MED, LLDP-POE
  • Syslog / Debug – Support
  • FAT/FIT/MACC mode switching – Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management

Available Model

• • RG-AP820-L(V2)

Ruijie Reyee RG-AP820-L V2 Wireless Access Point-Isometric View

Ruijie Reyee RG-AP820-L V2 Wireless Access Point, Fast Provisioning by Mobile APP

Ruijie Reyee RG-AP820-L V2 Wireless Access Point, Fast Provisioning by Mobile APP, Secure PPSK Authentication for Staff

Product SKU: Ruijie Reyee RG-AP820-L V2

Product Brand: Ruijie Reyee

Product Currency: AUD

Product Price: 489

Product In-Stock: InStock

Editor's Rating:
5