U-Prox iPR2 New Advanced Access Control Card Reader

U-Prox IC L Manages of Wireless Lock Subsystems

• 32 000 tags.
• Manage up to 250 control panels.
• Up to 32 independent virtual door groups.
• Data communication:(Ethernet 100Mbit) : ISM band wireless device two-way communication.
• ISM frequency bands: ITU Region 1 (EU): 868.0868.6MHz. ITU Region 2 (USA):902.5-914.5 MHz.ITU Region 3 (AUS): 915.5-927.MHz
• Wireless range up to 20m.
• Power supply: PoE class 1 or USB micro B.
• Network settings adjustment. Auto configuration in LAN USB micro B

Dahua DHI-ASR2101A Access Reader

Key Features

• • PC material, acrylic panel and IP66, suitable for indoor and outdoor use.
  • Support contactless recognition of IC card (Mifare card) .
  • Support card/password unlock.
  • Support communication through RS-485 and Wiegand 34 (Wiegand 26 can be configured).
  • Support buzzer and indicator prompt.
  • Support anti-tampering alarm.
  • The built-in watchdog can detect and control abnormal operation status of the equipment and perform recovery processing to ensure the long term operation of the equipment.
  • All connection ports have overcurrent and overvoltage protection.

Dahua DHI-ASR2200A-D Access Reader

• • PC material, tempered glass panel and IP66, suitable for indoor and outdoor use.
  • Support contactless recognition of ID card.
  • Support card unlock.
  • Support communication through RS-485 and Wiegand 34.
  • Support buzzer and indicator prompt.
  • Support anti-tampering alarm.
  • The built-in watchdog can detect and control the abnormal operation status of the equipment and perform recovery processing to ensure the
    long-term operation of the equipment.
  • All connection ports have overcurrent and overvoltage protection.

• U-Prox WRS485 Used to connect Wiegand readers to an elevator control panel U-Prox IC E.
• wrs485Using two converters, any wiegand reader can be connected over an extended distance (up to 1000m).

Dahua ASR1201D  Slim Water-proof RFID Reader

Key Features

• • Support RS485, Wiegand34 protocol(Wiegand 26 optional)
  • 13.56MHz(Mifare)
  • 125KHz(EM-ID)
  • Red and Blue LEDs
  • Watch dog function ensure device free from halting
  • Water-proof(Outdoor use)
  • Surface/Flush mounted install

Dahua DHI-ASR2100H Access Reader

Key Features

• • Card unlock.
  • RS-485 and Wiegand 34 communication (Wiegand-26 can be customized).
  • Prompts using the buzzer and indicator light.
  • Tamper alarm.
  • Watchdog monitors and controls the device when it behaves abnormally, performing recoveries when necessary to ensure the long- term operation of the device.
  • All the connection ports have overcurrent and overvoltage protection.
  • IP66 rated.

Dahua DHI-ASR2200A Access Reader

Key Features

• • PC material, tempered glass panel and IP66, suitable for indoor and outdoor use.
  • Support contactless recognition of IC card (Mifare card).
  • Support card unlock.
  • Support communication through RS-485 and Wiegand 34.
  • Support buzzer and indicator prompt.
  • Support anti-tampering alarm.
  • The built-in watchdog can detect and control the abnormal operation status of the equipment and perform recovery processing to ensure the long-term operation of the equipment.
  • All connection ports have overcurrent and overvoltage protection.

Hikvision DS-K1802M Mifare Card Reader

• • Mifare1/ EM card reader
  • PC+ABS material shell
  • Built-in audible beeper
  • Wiegand interface
  • IP65

• Intelligent U-Prox E Elevator Control Panel
• Provides access to the floor in accordance with the rights of the presented credential
• Ready for the next credential immediately after selecting permitted floor on the elevator controller
• Sends events to the ACS for access to the floor when user clicks on the selection panel floor in an elevator
• Allows access to the floor via operator override control, and by means of fault (short circuit) loop from the U-Prox RM module
• Deactivates the ACS panel controlling an elevator in case of emergency situations:
  • Failure of the main control module U-Prox IC-E
  • Failure or lack of power to the relay module U-Prox RM
  • Emergency input activation on the relay module U-Prox RM
  • By the manual operation / override of the Access Control System

• U-Prox DLK560 Smartphone for programming. Credentials: 1024.
• Build in touch sensor for request to exit.
• Event log: 4000. Real time clock. Door contact. connection input.
• External request to exit button input contact. COM, NC,NO relay output for lock connection.
• U-Prox S series reader connection port. RS PRO secure cryptoprotocol and full reader control.
• Application U-Prox Config supported by Android and iOS only with Bluetooth version from 4.0(BLE).

• The U-Prox iPR3 reader is housed in a robust polished stainless steel case and then sealed. Due to its increased strength, it can be used in conditions of danger of vandalism.
• Proximity ID reader is intended for use in access control systems focused on the use of interfaces: RS-232, Wiegand 26 bit, Wiegand 37 bit, Wiegand 42 bit, standard Wiegand with automatic selection and Touch Memory.
• Types of identifiers used: iPR-3 readers work with ASK and / or FSK identifiers. The reader can be programmed to work only with ASK identifier, only with FSK, to work with ASK and / or FSK (simultaneously). If two identifiers of different types are simultaneously brought to the reader programmed to work with two types, the ASK identifier will be read.

U-Prox NDC F18 IP panel – a device designed to control access to residential and business premises, including time of passage of and events. Panel operates with two readers, which are connected to the U-Prox NDC F18 IP access control panel via Wiegand interface.

• • U-Prox NDC F18 IP processes the information received from the reader (readers), and controls actuator (e.g. a lock) with the built-in four relays. Panel has eight End-of-line supervised inputs.
  • The panel can work offline or as part of the network. To add it to Access Control network, Ethernet (wired computer network) or Wi-Fi (wireless computer network) are used.
  • The network settings of the U-Prox NDC F18 IP  control panel are programmed via a standard USB port (mini USB B).