• PIR motion detector camera for outdoor surveillance
• F1 technology leverages long communication range, enhanced penetration and sensitivity rate
• Two levels of pet immunity: Low (75cm/60kg [132 lbs]) / High (50cm/35kg [77 lbs])
• 27 kilos (59 lbs) pet immunity eliminates false alarms caused by pets
• IP45 waterproof protection for outdoor usage
• CMOS camera with night vision capability

• Microprocessor controlled with advanced digitalized adaptive signal processor algorithm
• Installation angle is manually adjustable via a supplied rotating bracket (optional installation)
• Pet Immune Sensitivity can be controlled via a DIP switch. Immunity levels of both background environmental factor and pet are then adjusted accordingly.
• Four levels of Pet Immune Sensitivity are available: Low (75 cm / 60 kg), Medium (60 cm / 40 kg), High (45 cm / 30 kg), and Superior (30 cm / 20 kg)
• Adjustable environment settings: choices of facing a wall or open space, facing a lawn or concrete/stone ground
• Auto Temperature & Lux Profile Adjustments – complex intelligent D.A.S.P. algorithm to distinguish background environmental changes such as temperature and lighting and therefore avoiding false alarms
• Water resistance with IP rating 66
• Double protection of unauthorized sensor removal and opening/sabotage by both built-in Tilt  & Tamper Switches
• Protection from: direct sunlight, wind, snow and rain, and small animals
• Randomized supervision signals for trouble-free system integrity checking
  Low battery detection
• Superior radio interference rejection of up to 20V/m at frequencies of 100 kHz to 2.7 GHz
• Automatic power saving mechanism; Compact design
• LED: fault & test mode indicator, and also doubles as Walk Test activation button
• Superior white light noise rejection; Complied with CE & UL requirements

Hikvision DS-PM1-I1-WE Single Input Transmitter

Hikvision DS-PM1-I1-WE Single Input Transmitter

• DS-PM1-I1-WE wireless single input transmitter offers a connection of third party wired detectors like outdoor PIR, to AX PRO alarm system. The alarm types and zone parameters can be set through APP by installers easily, small size design is convenient for installation. Also, transmitter has a feature of detecting device removal by accelerometer application, if someone moves the detector away, an alarm will be reported immediately.
• • Small size design, which can be put into wired detector easily
  • 868MHz two-way wireless communication
  • LED display, show the real status of device
  • With one tamper input and one PGM, can be used as zone input or alarm output
  • With 3.3v voltage output, can be used to power up external wired detector
  • Detection of device removal by accelerometer

• PIR camera with dual sensors for outdoor surveillance
• Optimum camera coverage; Dispatches one real-time image on request
• Three alarm image processing options:
  • – 3 color VGA alarm images (640 x 480 pixels)
  • – 6 color QVGA alarm images (320 x 240 pixels)
  • – 3 color QVGA alarm images (320 x 240 pixels)
• CMOS camera with IR illumination also operates in total darkness
• Night surveillance up to six meters; AES encryption technology provides transmission security
• Microprocessor-controlled with advanced adaptive digital signal processing (ADSP) algorithms Installation angle is manually adjustable via a supplied rotating bracket
• Pet immunity level can be adjusted via a DIP switch
• Four levels of pet immunity: low (75 cm/60kg [132lbs]), medium (60 cm/40kg [88lbs]), high (45 cm/30kg [66lbs]) and superior (30 cm/20kg [44lbs])
• Automatic temperature and lux adjustments prevent false alarms; Waterproof to IPX5 standard
• Supervisory signals ensure proper operation; Low battery detection
• Automatic power saving mechanism; LEDs indicate faults and test modes
• Tamper protection; Compliant with CE and EN requirements

• Frequency: 433MHz / 868.6375Mhz / 869.2375Mhz / 433FM
• Power Source: CR2032 Lithium Battery x 1*
• Battery Life: 6 Years (*Battery life varies by use and configuration)
• Operating Temperature: -10°C to 45°C (14°F to 113°F)
• Operating Humidity: Up to 85% non-condensing
• Dimensions: 48mm x 36mm x 13.5mm
• Range: 433 MHz / 868.6375MHz – Up to 200m in Open Space, 433FM – Up to 350m in Open Space, 869.2375MHz – Up to 400m in Open Space

• Detects suspicious movements by passive infrared technology
• Dual-beam optics and Pet-immune; 2m & 5m switchable lens
• SMDA Logic for ultimate sensitivity optimization
• High immunity against false alarms; Wireless for flexible installation
• Built-in bracket enables horizontal rotation of 190 degrees
• IP55 Protection and UV resistant housing for outdoor use
• Protected against tampering and sabotage; Elegant compact design
• Suitable for balconies, floor length windows, poolside, garage, front entrance, French doors, sidewalk…etc.

• Combines one PIR sensor with a microwave sensor
• Activates alarms only when both the detector’s PIR and microwave sensors are tripped
• Extensive RF range (F1 models)
• Fast signal transmission (F1 models)
• Advanced adaptive digital signal processing (ADSP) algorithms
• High RFI/EMI immunity
• Adaptive detection range: 3 to 12 meters
• Detection angle: 110° angle
• Long battery life
• Automatic power saving mechanism
• Low battery detection
• Temperature compensation
• Wall- or corner-mounted
• Self-supervision and self-testing
• Tamper protection against sabotage
• LEDs display operational status
• Low and compact profile

• Siren output level is 104dB at 1 meter
• Unique alarm sounds for fire and burglary
• Lightweight and flexible to install
• Smaller, visually pleasing design
• Programmable siren duration of 3/5/10 minutes
• Sound notifications of arming, disarming, and low battery status
• Smaller, visually pleasing design
• Regular supervision signals to check system integrity
• Low battery detection
• Cover tamper protection prevents unauthorized removal and sabotage
• Compatible with Climax F1 Alarm Panels
• Compliant with CE requirement

• Reflective photoelectric sensor to detect smoke from any source, especially smoldering fires
• Rate-of-rise heat detection when temperature exceeds 57.25°C or rises by 8.25°C per minute (optional)
• Auto-calibration every month to re-adjust detection threshold value
• Self-diagnostics function to ensure optimal performance
• Loud 85dB Siren for audio alert; Wireless for easy and flexible installation
• Randomised supervision signals to check system integrity
• Built-in PIR motion detects movements and supports scene creation (optional)
• Built-in Emergency light to provide visual alerts (optional)
• Built-in Temperature sensor measures environment temperature (optional)
• Alarm silence button to quiet nuisance alarms; Excellent stability with high sensitivity
• Extensive RF range and fast speed data transmission
• LED status indicators for visual notification; Low battery detection
• Suitable for residential and commercial premises

• Sleek, modern design with long battery life; Mounted on door or window frames
• Extension terminals for connection to wired devices; Doubles as an universal transmitter
• Enables home automation and security systems to turn on/off appliances accordingly
• Optional IPX4 waterproof case for outdoor usage (DC-23R3-F1 only)
• Optional IPX4 waterproof case comes in multiple colors for camouflage purpose (DC-23R3-F1 only)
• Powerful magnet allows for an overall side-to-side gap distance of 28mm
• Randomized supervision signals to check system integrity and troubleshooting
• Tamper protection to prevent unauthorized removal
• LED serves as a fault and test mode indicator; Low battery detection
• Compliant with CE requirement; Certified to Standard: EN 50131 Grade2, Class II

• Advanced Dynamic Speed Adjustment Algorithms to maintain stable & fast image transfer speed based on signal quality
• Wide camera field of view leaves no blind spots
• Captures one, three, or six images when irregular motion is detected
• Two adjustable sensitivity levels: High / Normal
• Three alarm image processing options:
  • • – One color VGA (640×480 pixels) alarm images
    • – Three color QVGA (320×240 pixels) alarm images
    • – Six color QVGA (320×240 pixels) alarm images
• F1 technology accelerate the speed of signal transmission, boosts communication range
• Low battery consumption
• Delivers one image upon request
• Night illumination capability
• LEDs indicate faults and test modes
• Regular supervision signals ensure proper operation
• Tamper protection to prevent unauthorized sabotage
• Low battery detection
• Wall bracket for flexible installation
• Compatible with Climax’s F1 gateways/control panels
• Compatible with Climax’s Repeater RP-29 series (VST-862-P5-F1 only)
• Suitable for security and home automation usage

Hikvision DS-PDPG12P-EG2-WB Wireless PIR-Glass Break Detector

Hikvision DS-PDPG12P-EG2-WB Wireless PIR-Glass Break Detector

• • PIR Detection Range: 12m / 85.9°
  • Glass Break Range: 8m / 120°
  • Up to 30KG pet immunity
  • Fully remote configurable through App
  • Multiple enrollment method and easy installation design
  • Easy replaceable battery with PCB protected